Coal rod extruder system is the main equipment in fuel molding section, it will fuel coal powder extrusion into a certain strength of the coal rod ( shapes according to the requirements of many species), used instead of coal, into the gas furnace combustion new technology. It can be fully justified in pulverized coal combustion, reduce cost.
This machine adopts variable pitch impeller, the cylinder rear coal power forward, coal powder in the cylinder body volume received after compression, through a front head hole extrusion, forming coal rod, the circular shape has many kinds. Coal rod shape also has a variety of. Coal rod in the process forward by gravity to break.
This machine adopts the Hardened reducer, small volume, high bearing capacity. The interior of the impeller using thicker blade design, impeller and cylinder liner board adopts wear-resistant casting material, life than ordinary material to improve 4-5 times; machine head coal rod outlet adopts the replaceable wear-resistant alloy steel, convenient replacement. Head on the cylinder adopts the articulated form, maintenance time opens, replacing the internal of the impeller and the cylinder liner is convenient
450 type coal rods machine parameter table
Type RYMBJ450Stand-alone output（t-h) 8-12 power（KW �20Coal rods machine cross-section shape（mm� φ20-30rotate speed（rpm�32screw impeller diameter （mm� φ420Spiral number 4contour dimension（mm� 5130×1520×1480Request adding particle size (�mm) Adding water content �2�4%）Co***ny Website : http://www.zzryjx.cn Consulting telephone�8739931866 18739931899 |
Home
